Keep Motivated

Lift the locking levers on both sides you may need to use long-nose pliers and slide the back straight up to remove it from the recliner. As stated most folks will just cut a log part way and then roll it for the finish cuts.

Spitzlift Lifts Motorcycle Into Pickup Truck Trucks Pickup Trucks Truck Accesories

Using simple tools and a little bit of re-purposing I will show you how to move really heavy objects with easeIn this case I move a big wood stove by mys.

How to lift something heavy into a tree. Be a sofa magician. The PotLifter is ideal for lifting heavy and awkward objects such as flower pots potted plants planters trees garden supplies like mulch and firewood landscaping stones tree root balls and more. If the tree is directly lifted into the planting hole it is better to lift the tree off the trailer in a more vertical position but this does place more pressure on the trunk.

A good peavey or cant hook can lift a pretty big log clear of the ground for cutting but in. The winch with the red handle lifts the tree. Center it on top of the 4 pipes then roll or lift the rock onto the plank.

An old sheet of plywood works well for a plank. Lay the three poles side by side on the ground and lash them together about 1 foot from the top ends using heavy rope or chain. Use a pry bar or ratchet hoist to move the rock if necessary.

For the same reason it is important to always use a hoisting strap for heavy root balls. A basic pulley system requires rope a wheel with a groove in it for the rope to sit in and an area to suspend the pulley wheel from. There are all kinds of tools for lifting logs once they are cut into a manageable length.

The raised area must be higher up than the total height the object must be raised. The winch with the blue handle rocks the boom forward. Might want to make the sling from steel cable or stout rope with a sleeve of sturdy hose that can spin around the rope and be a roller for the logs.

You need something that will hold 5-10 thousand pounds test like tie-down straps work real good especially since you can tie and then adjust use reinforcement bars rebars cut to two feet nail these a foot and a half deep in the ground then tie the straps to one around the tree. Pulleys Pulleys are used to lift heavy weights vertically. As shown in the image below make sure to place a block under the outrigger before loading.

If loading heavy items you will want to add an outrigger stabilizer to your truck crane. An inexpensive and safe way to trim tall trees that are too high to reach. Set them up and spread the bottoms to form a stable tripod over the object you want to lift.

Put a plank on top of the pipes then put the rock on the plank. Here we lift a very heavy bald cypress tree. Run the sling at the tail end of the bed buck the end of a log into the sling lift and push from the other end.

You can do it yourself without a ladder a lift or a professional. The tree is extremely heavy. We yell more red handle and less blue handle and debate whats the best way to put the tree on the truck and what way is even possible.

Tie the footrest in place so it doesnt spring open. Pulleys work by means of a grooved wheel that pivots around an axle. Outrigger stabilizer for homemade truck crane.

Always lift a recliner from the sides not by the back or footrest. This way after loading you can drive your truck ahead a few inches and then remove the outrigger stabilizer. A 2 person lifting tool share the weight and lift objects weighing up to 200lbs.

Test the tripod for sturdiness then lay the poles down again or set up a stepladder so you can reach the lashed area. When the pulley is fixed to a solid anchor and a rope is threaded through the grooves on the pulleys wheel it can be used to lift heavy weights much more easily than doing it by brute force.